Skip to the story

Click anything

Drag to turn the view. Click a lot, a building, a pipe or a street light to see its public record. Explore freely locks the page to the map.

Hire Me

8 stagesOne real cityPublic dataClick any property

Geographic Infrastructure Systems

A city keeps track of itself with a stack of maps. One for the lots, one for the buildings, one for the streets, and more for everything buried underneath. Every shape on every map has a record behind it. That’s a GIS, a geographic information system. Scroll down through the public layers of Los Angeles, then click any property or pipe to read its record.

Or page through it: PgDn Space next caption · PgUp back · HomeEnd start / end

Stage 1 · Measured · Act I

Lines on a map

GIS means geographic information system. In practice it’s how a city keeps track of what it has and where it is. Start with the easy part.

This is the city limit of Los Angeles. One shape, straight from the city’s own map.

Add the streets. Each line is one block of road, from one corner to the next.

That’s a layer: one kind of thing, each with its place on the ground.

A GIS is a stack of layers like this. Most of them you’ve never seen.

Stage 2 · Measured · Act I

A shape and a row

Every other layer leans on this one: the land, cut into lots, with a record for each.

Zoom in. This is central Los Angeles, a few miles across.

Each outline is a lot. The county assessor keeps a record for every one.

Pick one. Right now it’s just a shape.

Ask the layer about it and you get this: what the land is used for, when it was built on, what it’s assessed at.

That’s all a GIS is. A shape on a map with a row of facts attached.

Stage 3 · Measured · Act I

What’s built on it

A second layer on the same ground: every building, plus one number that turns a flat map into a model.

Same lots. Now lay another layer on top: the outline of every building.

Each outline has a height, measured from the air. Raise each one by that number.

Nobody modelled this by hand. It’s a flat map and a column of heights.

Two layers from two different offices, and they line up, because both record where things are.

Stage 4 · Measured · Act II

Under the street

Most of what a city owns is buried. The map is the only place you can see all of it at once.

Back out to the whole city. There’s a layer under the streets that almost nobody looks at.

The sewers. Every pipe the city lists as in service.

The layer knows which end of each pipe is downhill. Watch the pulses.

Nearly all of it drains by gravity to one place, a treatment plant on the coast.

Every pipe is a row too: its size, what it’s made of, the year it went in.

Stage 5 · Measured · Act II

Where the rain goes

There’s a second network down there, easy to confuse with the first. It carries rain, and it ends up somewhere else.

Between the streets and the sewers is another set of pipes.

Storm drains. They take rain from the gutter and nothing from indoors.

They skip the treatment plant. They empty into the river and the ocean.

Two networks under one street, kept as two layers. That’s how crews know which pipe is which.

Stage 6 · Established · Act II

The grid

This is where the public record runs out. The map has to be borrowed from volunteers.

Electricity next. The city doesn’t publish a map of its power network.

These lines come from OpenStreetMap. Volunteers drew them from what shows up in aerial photos.

The big transmission lines are well covered. The wires along ordinary streets mostly aren’t.

A layer is only as good as whoever keeps it up. This one is useful, but it isn’t the utility’s.

Stage 7 · Metaphor · Act III

What’s not on the map

At least four more networks run under these streets. They’re all mapped. You just can’t see the maps.

Everything up to here was public. These layers aren’t.

Water mains. Gas mains.

The power lines to each building. Phone lines and fibre.

Each of these is a layer in somebody’s GIS. A utility’s, or a company’s.

So before anyone digs, each owner has to come out and paint its own lines on the road.

Stage 8 · Measured · Act III

Joined by place

Different offices made these layers and nothing links one to another. They can still answer a question together.

A few blocks of downtown, with every public layer switched on.

Pull them apart: lots and buildings, streets, storm drains, sewers.

Now ask something no single layer can answer. What’s under this lot?

Drop a line through it. The nearest pipe in each layer turns up by distance alone.

That’s the point of a GIS: questions that cut across layers, answered by where things are.

Stage 9 · Measured · Finale

Click anything

Same few blocks, and now it’s yours. Click any shape to see what the public record says about it.

Down into the same blocks of downtown Los Angeles.

Drag to turn the view. Click a lot, a building, a pipe, a hydrant or a tree.

Press “See underground” for the pipes, or switch layers off to reach what’s beneath.

Press “Explore freely” to take the map over. The page stops scrolling until you leave.

Everything here comes straight from public map layers. This is what they can look like.